Estimators
Tim Emerich
Estimator-Sheet Metal-Commercial
Department: Sheet Metal
Years of Experience: 41
Market Expertise: Commercial, Industrial, HVAC, Ductwork
Service Expertise: HVAC Commercial – Industrial Ductwork
What are your Strengths: 41 years of HVAC ductwork fabrication, installation, and estimating.
3 Highlighted Projects: Hain Celestrial, Appell Center Renovations, Becton Dickenson
Fun Fact: Automotive Historian.
Brandon Frank
Sheet Metal Estimator
Department: Sheet Metal
Years of Experience: 19+
Market Expertise: Multi-Story Residential/Commercial, K-12 Buildings, Installation
Service Expertise:
License(s):
What are your Strengths: 17 years of install experience, attention to detail, using logic & practicality.
3 Highlighted Projects: Twin Valley HS, Shippensburg MS, PSU Stone/Hastings/Snyder Buildings
Fun Fact: Fluent in Spanish, sports card collector, and was in a rock band for many years.
David Sager
Sheet Metal Estimator
Department: Sheet Metal
Years of Experience: 12+
Market Expertise: Multi-Story Buildings & Specialty Metals
Service Expertise:
License(s): Journeyman
3 Highlighted Projects: Emory H. Markle I.S. / KJ Kan / Hershey Creamery
Michael Yates
Virtual Design Technician/Estimator
Department: Sheet Metal
Years of Experience: 9
Market Expertise: Custom Steel Detailing & Design
Service Expertise: Drafting, Design, Detailing, & Modeling
License(s): Not Applicable
What are your Strengths: I am passionate about what I do, and why I do it. I enjoy a challenge especially when it requires critical thinking.
3 Highlighted Projects: YMCA Unit Platforms ┃Covanta Soda Ash & Lime Maintenance Platform ┃Ring Container Catwalk
Fun Fact: I love the outdoors and nature. Fishing, hunting, and exploring are my favorite things to do.
Dave Hanten
Sheet Metal Estimator
Department: Sheet Metal
Years of Experience: 29+
Market Expertise: Commercial HVAC & plumbing
Service Expertise: Having been a mechanical estimator and project manager, I have been involved with every aspect of a project from design to completion. Planning, equipment, codes, and customer needs continually evolve.
License(s): N/A – previous member of NFPA and ICC
What are your Strengths: I strive to provide the best possible customer service.
3 Highlighted Projects: I have been involved with many projects over the years. Each one is unique and has its own requirements. However, they all require teamwork from start to finish.
Fun Fact: I enjoy 600-to-1,000-piece jigsaw puzzles (every piece has its place)
Mark D. Shaw Jr., CPD
Mechanical Designer, C.P.D
Department: Engineering
Years of Experience: 24
Market Expertise: Multi-story offices, multi-story residential, large-scale VRF projects
Service Expertise: Pre-construction, estimating, design, and negotiating while looking out for the client’s best interest.
License(s): CPD
What are your Strengths: Building and maintaining lifelong relationships that benefit our entire team. Taking on the most complex projects that most people will run from.
3 Highlighted Projects: Redwood Campus (University of Maryland), Mchenry Row complex, and Clark’s Shoe’s Distribution.
Fun Fact: I enjoy helping the community in any way I can. I am the chancellor of the Knights of Columbus and love coaching my girls in softball. I have a Tamaskan dog named Django and my wife and I traveled to Maine to get him (stopping to see the Green Monster in Boston along the way!).
Chuck Hanna
Sr. Mechanical Estimator
Department: Estimating
Years of Experience: 35
Market Expertise: Commercial, Industrial and Manufacturing
Service Expertise: Estimating
License(s): Master Plumbing License
What are your Strengths: Plumbing and Piping
3 Highlighted Projects: Harley, Appell Center, BAE
Fun Fact: Chuck enjoys all sports, spending time with his partner Dawn in the Kayak and hiking nature.
Jeremy Drawbaugh
Estimator- HVAC & Plumbing
Department: Plumbing & HVAC
Years of Experience: 20 years Total, 5 years Field Experience, 9 years Sheet Metal fabrication, 6 years Estimating.
Market Expertise: Industrial/Commercial Plumbing and HVAC
Service Expertise: Estimating PS Plumbing & HVAC. Sheet Metal Fabrication Layout & Sheet Metal Fabrication Estimating.
Include One small Sentence: Jeremy enjoys picking up the phone and building relationships with his customers and vendors. Communication is KEY to any project.
Name at least 3 projects you are most proud of: Huber Innovation, Chesapeake Spice, Crispus Attucks.
Fun Fact: In 8th grade Jeremy’s class won a statewide essay contest that included an all-inclusive trip to Space Camp in Alabama. Some would say Jeremy is a space & weather nerd.
Mark Schnupp
BAS Programmer/Estimator
Department: Engineering
Years of Experience: 8+
Market Expertise: Commerical, industrial, and institutional plumbing and HVAC
Service Expertise: HVAC and Plumbing system design and coordination
License(s): Engineer in Training
Education: BS in Mechanical Engineering Technology from Penn State University
AAS in Mechanical Engineering Technology from Thaddeus Stevens College of Technology
What are your Strengths: I always try to put myself in the shoes of others and try to understand their perspectives to serve my teams and customers better by increasing my understanding of the whole picture.
Caleb M. Albright, E.I.T.
Mechanical Designer, E.I.T.
Department: Engineering
Years of Experience: 1
Market Expertise: I am not an expert on anything, but I hope to grow in the industrial/process mechanical side of things.
License(s): E.I.T.
What are your Strengths: I have a childlike curiosity about the world. I enjoy reading and learning new things from books or from those around me. Although I only have a little over a year of experience out of college, I truly have well over a hundred years of experience at the tip of my fingers, for when I do not know the answer, I will always find someone who does know here at Walton.
3 Highlighted Projects:
- •G&S Chocolate Liquor Transportation System and Hot Water System (Not Finished)
- •IWM Wire Draw Bench Process Cooling (Almost finished)
- •Sacred Heart Catholic Church Condenser/Coil Replacement
Gary Figdore
Building Automation Manager
Department: Service
Years of Experience: 26
Market Expertise: Automating Multi-Story Industrial, and Medical Facilities
Service Expertise: 26
License(s): •Journeyman Electrician (PA)
•Journeyman HVAC (PA and MD)
•Diakin certified.
•Honeywell AX and N4 certified
What are your Strengths: Design, and operation of equipment for building automation, control wiring and schematics, operation and repair of equipment, project managing and estimating. Working with others to get a complete package to the customers.
3 Highlighted Projects:
•Harley Davidson
•Odea Medical Center in Towson
•Lutheran Center in Baltimore
Fun Fact: I love scuba diving in tropical destinations, and all outdoor activities.
Michael Gay
Building Automation Estimator
Department: Controls Dept.
Years of Experience: 13
Walton & Company
PA
1800 Industrial Hwy
York Pa 17402
717.755.9030
Shop
3320 Concord Road
York Pa 17402
717.840.2258
MD
116 Lakefront Dr
Cockeysville, Md 21039
410.891.8631
Contact Us Today!
Blog News
Precision Redefined: Unlocking Reality Capture with the Faro S70 Scanner
Walton’s VDC team is leveraging cutting-edge technology to enhance our design process! Walton & Company uses the Faro S70 scanner for reality capture in complex spaces where measurements are crucial. By scanning this tenant space, […]